ASI294MM Pro

View Cart “ASI183MC Pro (color)” has been added to your cart.

$1,480.00

Available on backorder

SKU: ZWO ASI294MM-P Categories: ,

Product Description

294mm parameters

ASI294MM Pro is a back-illuminated, 4/3” format, 14-bit ADC camera with 4.63um pixels. It is the mono version of ASI294MC Pro, one of the top selling cameras from ZWO. It has an impressive 66ke- full well capacity and 4144*2822 big resolution.

Not only does it have a very high QE value with a peak at about 90%, but feature an ultra-low readout noise of 1.2e. If you are seeking for a small-format mono camera for astrophotography, then ASI294MM Pro gonna be your ideal choice.

ASI294MM Pro - 2

14-bit ADC and 13stops dynamic range

ASI294MM Pro has very similar parameters as its color version. Both have the 14bit ADC and a high dynamic range of 13 stops, which is even higher than that of ASI1600MM Pro camera.

ASI294MM Pro - sensor

Backlit Sensor

The back-illuminated CMOS sensor improves sensitivity and noise reduction – the key factors to enhancing image quality, while radically realigning their fundamental pixel structure from front-illumination to back-illumination. It has retained the advantages of CMOS image sensors such as low power consumption and high-speed operation.

With a conventional front-illumination structure, the metal wiring and transistors on the surface of the silicon substrate that form the sensor’s light-sensitive area (photo-diode) impede photon gathering carried out by the on-chip lens. A back-illuminated structure minimizes the degradation of sensitivity to optical angle response, while also increasing the amount of light that enters each pixel due to the lack of obstacles such as metal wiring and transistors that have been moved to the reverse of the silicon substrate.

backlit-sensor

Camera Performance

Large well depth capacity, low read-out noise and high dynamic range.

The full well capacity of 66387e of ASI294MM Pro is near the top of all ASI DSO cameras. It ensures a very high dynamic range up to 13stops that will greatly reduce overexposure probability and help gain richer color gradation.

When the gain value is 120, the magical HCG high gain mode is turned on, the readout noise will be largely decreased (as low as 1.2e), and the dynamic range is basically unchanged.

294MM_FW_EG_DR_RN

Unlocked Bin1 Mode

One thing about ASI294MM Pro which can be very special is that the pixel size is switchable – the default setting is Bin2, but you can switch to Bin1 anytime in your astrophotography software to change the pixel size into 2.3um. This is what we called “Unlocked Bin1 Mode”.

294MM-P-Bin-1

Unlocked Bin1: 12bit ADC, 2.3um pixel size, 47 megapixels, 8288*5644 resolution, 14k full well capacity.
Bin2 (The default mode): 14bit ADC, 4.6um pixel size, 11.7 megapixels, 4144*2822 resolution, 66k full well capacity.

You can learn the more differences between unlocked Bin1 and Bin2 modes by comparing the performance charts.

294MM-P-bin-2

If the sampling accuracy you get with the 2.3um pixel size falls into a reasonable range, then the unlocked Bin1 mode will help you get more object details. However, you will lose dynamic range and the bit depth of ADC. Also the image files you get at Bin1 will probably be 4 times bigger than Bin2.
So in the end the unlocked Bin1 mode is double-edged, you may choose to use it or not on your own.

Reliable Mechanics

There are four screws on the camera that seal the sensor chamber. This kind of design has been extensively tested and is very stable. Even when used in higher humidity environments, ASI294MM Pro will still work fine without dew problems.

Reliable Mechanics

QE Value

As ZWO’s latest BSI (backside illuminated type) mono camera, ASI294MM Pro has very high QE performance, not only higher than its color version, but even ASI1600MM Pro. It is estimated that the QE peak value is about 90%.

官网尺寸——294mm-p与1600mm-p QE对比

ASI294MM Pro vs ASI1600MM Pro

ASI294MM Pro vs ASI1600MM Pro

Two-Stage TEC Cooling: Ultra-Low Dark Current

ASI294MM Pro uses two stage TEC cooling that can lower the CMOS sensor temperature to 35c~40c below ambient, which can greatly reduce dark current generation and sensor noise even with extended exposure times.

The unique dark current suppression technology can even further reduce dark current noise. When it’s cooled to -20℃, the current noise can be as low as 0.0022e/s/pix, which is completely negligible!

DCvsT-294MM_20200811

Please notice that the camera needs to be connected to an external 11-15v power supply to implement the cooling function. We recommend you use 12V@3A DC adapter (5.5*2.1mm, center pole positive) or lithium battery with 11-15V to power the camera.

 

USB3.0 & 256M DDR3 Memory

The ASI294MM Pro is equipped with a USB 3.0 transmission interface and a built-in 256MB(2Gb) DDR3 cache to ensure stable and secure data transmission. Under long exposure, it effectively avoids frame dropping and greatly reduces the glow effect caused by slow reading speed.

DDR-buffer

Notice: For the possible amp glow that shows on your images, please refer to this tutorial: “What is Amp-glow and how do I manage it? “

https://astronomy-imaging-camera.com/faq

 

Mechanical Diagram

Mechanical Diagram - ASI294MM Pro

What’s in the box?

what is in the box - ASI294MM Pro

The best solution of 55mm back focus length

Cooled-Color-Camera-solution Cooled-Color-Camera-with-OAG-solution

Before first usage of this product read Manuals and install correct Drivers and Software.

Do you have question, answer or comment? Post here!

  1. Avatar

    :

    I currently have a zwo1600mmc I am looking at the 294mono and would like to buy the zwo but being able to unlock the bin on the qhy294 is a big incentive to buy that product. Will you guys be unlocking that feature any time soon? i am looking at the purchase in the next couple of weeks or so
    Thanks in advance
    Andy




    8



    0
    • Avatar

      :

      We will consider this feature.




      1



      0
  2. Avatar

    :

    I have F/4 telescope. Your EWF page said “ 31mm filter won’t have vignetting up to F2 lens.” It is for 1600MM and I assume it is same for 295MM. On the other hand, I found the comment saying “ The 1.25″ filters maybe small for the f/4.5 telescope. You can use 36mm or 2″ filters”

    What size of filters should I use for F/4?




    0



    0
    • Avatar

      :

      You can use 31mm or 36mm filters.




      0



      0
  3. Avatar

    :

    Hello, if you will consider to unlock the 1×1 binning mode for this camera, like the QHY294M, would it require hardware of software update only? I’d like to buy asi294mm pro now only if unlock 1×1 binning update can be done with current camera using soft update. thnaks




    3



    0
    • Avatar

      :

      We will update the information on our website, you can keep an eye on it.




      2



      0
  4. Avatar

    :

    Hi, When will the completes kits be available like ASI1600mm




    0



    0
    • Avatar

      :

      We will consider this.




      1



      0
  5. Avatar

    :

    Hello, does ASI 294mm work with the original Asiair (not PRO)? Thanks.




    0



    0
    • Avatar

      :

      Yes, the original ASIAIR support ASI294MM.




      1



      0
  6. Avatar

    :

    How do I turn on/off the internal dew heater mentioned in your online description of this camera. I have one and I think I’m having dew problems.




    0



    0
    • Avatar

      :

      You can turn on/off the dew heater in our ASIStudio software.




      0



      0
  7. Avatar

    :

    Hi, the news asi 294mm pro is supported by my asi air pro? Thanks




    0



    0
    • Avatar

      :

      The ASI294MM Pro will be supported by the new version 1.5 of ASIAIR PRO. And the new version will be released in the near future.




      0



      0
  8. Avatar

    :

    Do you have an estimated shipping date for this item?




    0



    0
    • Avatar

      :

      We will arrange the shipping according to the order number, it may take around 2 weeks for shipping.




      0



      0
  9. Avatar

    :

    Will you unlock the 1×1 binning mode for this camera? (Like the QHY294M)




    3



    0
    • Avatar

      :

      Thank for your feedback, we will convey your feedback to our devs and they will consider this.




      2



      0
  10. Avatar

    :

    Thank you, but then please update description and specification, as it is still for the IMX294. 4144*2822 pixels, 4.62 µm Pixel size, 14bit ADC and 16.3 fps don’t fit with the IMX492, which has 8192×5556 pixels in total, 2.315 µm pixel size, and supports 10 and 12 bit conversion, but not 14bit.




    1



    0
    • Avatar

      :

      The sensor is exactly right, and the description and specification are also right.




      1



      1
  11. Avatar

    :

    When camera will be available ?




    0



    0
    • Avatar

      :

      You can order now, and we will arrange delivery to retail customers and dealers step by step.




      0



      0
  12. Avatar

    :

    Are you sure that it is an IMX492 sensor? Camera name and specification suggest it is an IMX294 sensor.




    0



    0
    • Avatar

      :

      Yes, the sensor of this camera is exactly IMX492.




      0



      0
  13. Avatar

    :

    is it ready for shipping or you are just collecting the pre-orders? also with FedEx can you ship it under one week?




    0



    0
    • Avatar

      :

      You can order now, and we will arrange delivery to retail customers and dealers step by step. The shipping time is depend on your local courier, it will take around 7-10 days arrive at your country, and it may take more time for shipping and arriving at your house.




      0



      0
  14. Avatar

    :

    The sensor name is listed as IMX492 in the Product Description diagram. Is this correct?




    0



    0
    • Avatar

      :

      Yes, it is correct.




      0



      2
  15. Avatar

    :

    When can we expect the filter wheel kit to be on sale for this camera? Also, which filters would be good for the ED80 f/6 scope – 1.25” or 2”?




    0



    0
    • Avatar

      :

      We will release this kind of kit in the near future. Maybe the 2″ filters will be better for f/6 scope.




      3



      0
  16. Avatar

    :

    My telescope has M54 female thread and the back focus is 55mm.
    I want to use M68 OAG + 7×2″ EFW + ASI294MM Pro.
    How can I connect M68 OAG with my telescope?
    Can I keep the back focus 55mm?




    0



    0
  17. Avatar

    :

    1. 1.25″ or 2″ filter for f/10 SCT telescope?
    2. How do I get 110 mm back focus for my telescope?




    0



    0
    • Avatar

      :

      1.1.25″ filter is suitable for planetary image for f/10 SCT telescope. And 2″filter is suitable for deep sky object image.
      2.Sorry we only have the solution of 55mm back focus.




      0



      0
  18. Avatar

    :

    will it have the unlocked pixel mode like qhy, to be able to unbin and image at 2.315um pixels ?




    3



    0
    • Avatar

      :

      Sorry this camera will not have this mode.




      1



      4
  19. Avatar

    :

    When camera will be available ?




    0



    0
    • Avatar

      :

      This camera is available now.




      0



      0
  20. Avatar

    :

    Will 1.25″ be OK at f/4.5? Using ZWO EFW.




    0



    0
    • Avatar

      :

      The 1.25″ filters maybe small for the f/4.5 telescope. You can use 36mm or 2″ filters.




      0



      0

Add new

Shipping

It will take around 60-90 days for shipment via ePacket/China Post Registered Air Mail/EMS, which can’t be guaranteed due to force majeure.

  • Fast Shipping(amount ≧ 199USD) for free
  • Fast Shipping(amount < 199USD) : $20.00 (We do not provide free shipping from now on.)

If you can’t get the air mail package after 2months, please let us know ASAP: info@zwoptical.com

Introduction

  1. Fast Shipping: we will choose DHL, UPS, FedEx etc to deliver it. Usually you will get your package within 7-14 days.
  2. Customers from Brazil and Chile should leave a message to provide your CPF or CNPJ as your custom needs it.
  3. Customers from Russia need to provide the complete English name with three words as well as the English shipping address.

Tracking site

DGM: http://webtrack.dhlglobalmail.com/?locale=en-US

China air mail: http://www.17track.net/en

 

Tax

  • The price list on our website is USD without tax.
  • Please note that buyers are liable to pay tax involved, such as Import tax, VAT , customs handling fee, etc. The additional fees may be collected at time of delivery by courier.
  • For best local service we advise customers buy our cameras form local dealers.

Warranty and Return Policy

  • We provide 2-year warranty for our products, we will offer the repair service for free within warranty period. After the warranty period, we will continue to provide repair support and service on a charged basis. We do not provide any replacement unless ZWO confirmed the product is DOA (Dead On Arrival).
  • This warranty does not apply to damage that occurred as a result of abuse or misuse, or caused by a fall or any other transportation failures after purchase.
  • Customer must pay for shipping when shipping the camera back for repair or replacement. If we confirm you can get a replacement, goods must be returned with all accessories, instructions, etc and must be suitably packed.
  • If you get a faulty camera, please contact us as soon as possible though email: support@zwoptical.com. Please describe the problem in detail and we will do our best to help you solve the problem. Most instances perceived problems are simply bad driver install or software configuration.
  • We will provide you RMA number if your camera requires warranty repair. We refuse any return without RMA number!
  • For customers who bought the camera from our dealer, dealer is responsible for the customer service for you.