ASI462MC(color)

View Cart “ASI120MC-S (color)” has been added to your cart.
Sale!

$299.00$399.00 $249.00$349.00

Clear
SKU: ZWO ASI462MC Categories: , ,

Product Description

ASI462MC body

ASI462MC parameters

With the ability to capture light in the near-infrared portion of the spectrum, and the super high sensitivity combined with ultra-low readout noise, this camera is considered as the highly improved version of ASI290MC. It will offer great performance for planetary, solar and lunar imaging. Some highlights include:

  • Sony IMX462 1/2.8” format 12bit ADC
  • 2.9um pixel size
  • Well depth of 2ke-
  • Total of 2.1 mega pixel accommodating a resolution of 1936*1096
  • Ultra-low read noise of 0.5e- to 2.6e-
  • 90% QE at 850nm.

 

IMX462 sensor

The format of the IMX462 sensor is 1/2.8”. The sensor length and width are 5.6mm*3.2mm and the diagonal is 6.46mm. The resolution is 1936*1096.
ASI462MC sensor

HCG mode

The cameras has a built-in HCG mode which can effectively reduce the readout noise at high gain and keep the same wide dynamic range as you would expect at low gain. When the gain is 80, the HCG mode will automatically turn on. This results in the read noise being as low as 0.47e- while the dynamic range still can reach close to 12 stops.

462_FW_EG_DR_RN_new

QE curve

ASI462 has very high QE value at 800-1000nm wavelength (almost 2 times higher than that of ASI290MC). The sensitivity in near-infrared light region ranks first among all ASI planetary cameras.

ASI462 QE curve

ASI462MC vs ASI290MC

In general, ASI462MC and ASI290MC share very similar characteristics but ASI462MC has some benefits in its favor in terms of lower readout noise and higher QE value.

ASI462MC vs ASI290MC

USB 3.0 Port & ST4 Port

USB 3.0 Port: Providing 5Gb bandwidth to let ASI462 run at 136.1fps (10bit, high speed mode) or 63.9fps (12bit, normal mode) at full resolution(2.1Mega).

ST4 Port: Can be used to connect with auto guide port of mount for guiding.

 

Mechanical Diagram

asi462MC-Mechanical-Drawing

What is in the box?

 

行星相机套装4-英

Camera technical details

Sensor: SONY IMX462 CMOS
Format: 1/2.8”
Diagonal : 6.46mm
Resolution: 2.1 Mega Pixels, 1936*1096
Pixel size: 2.9µm
Sensor size: 5.6mm * 3.2mm
Max fps: 136FPS
Shutter: Rolling shutter
Exposure range: 32µs-2000s
Readout noise: 0.47~2.65e
QE peak: TBD
Full well: 11.2ke
ADC : 12bit
USB interface: USB3.0
Adapters: 2”/ 1.25”/ M42*0.75
Protect window: AR
Dimension: φ62mm*35.5mm
Weight: 0.11kg
Back focus length: 12.5mm
Working temperature: -5°C~50°C
Working relative humidity: 0~80%
Supported OS: Windows, Linux & Mac OSX
Max FPS at full resolution:
Resolution 12bit 10bit
1936*1096 63.9fps 136.1fps
1920*1080 64.8fps 138.1fps
1280*720 96.5fps 205.6fps
640*480 143.1fps 305fps
400*400 170.6fps 363.5fps
320*240 276.8fps 589.6fps

Shipping

Fast Shipping: we will choose DHL, UPS, FedEx etc to deliver it. Usually you will get your package within 7-14 days.

  • Fast Shipping(amount ≧ 199USD) for free
  • Fast Shipping(amount < 199USD) : $20.00 (We do not provide free shipping from now on.)

Introduction

  1. It will take around 60-90 days for shipment via ePacket/China Post Registered Air Mail/EMS, which can’t be guaranteed due to force majeure. If you can’t get the air mail package after 2months, please let us know ASAP: info@zwoptical.com
  2. Customers from Brazil and Chile should leave a message to provide your CPF or CNPJ as your custom needs it.
  3. Customers from Russia need to provide the complete English name with three words as well as the English shipping address.

Tracking site

DGM: http://webtrack.dhlglobalmail.com/?locale=en-US

China air mail: http://www.17track.net/en

 

Tax

  • The price list on our website is USD without tax.
  • Please note that buyers are liable to pay tax involved, such as Import tax, VAT , customs handling fee, etc. The additional fees may be collected at time of delivery by courier.
  • For best local service we advise customers buy our cameras form local dealers.

Warranty and Return Policy

1. ZWO will provide a 2-year free warranty service (Warranty Period) for ZWO products purchased by Users from ZWO (“Products”) in accordance with this Policy, commencing on the day following receipt of the Products by Users. For ASIAIR Plus users, commencing on the day of device activation.

2. If a User encounters the following Dead on Arrival (DOA) and contacts ZWO within the corresponding time limit to issue the Product purchase invoice and relevant evidence, ZWO will provide door-to-door pick-up service and, as appropriate, after-sale replacement (or partial replacement), repair or return (or partial return) service for the following Products:
1) Product quality problem
Provided that a User detects a quality problem and contacts ZWO within 30 days after receipt of the Products, and ZWO support team confirms that the Products indeed have a quality problem or defect after their inspection, ZWO will provide free replacement service towards such Products;
2) Product transportation problem
Provided that a User finds obvious signs of bubbling, serious overstocking, or deformation on the outer package of the Products upon receipt of the Products, and provides ZWO with pictures of the outer package and proof of receipt within 3 days after receipt of such Products, ZWO support team will verify the actual shipper and determine the responsible party for such transportation problem. In the event that ZWO is the actual shipper, ZWO will be responsible for providing the relevant return or replacement service, however, if the Products are directly sold or transported to the User by an agent of ZWO, the agent will be responsible for providing the relevant return or replacement service.

3. If the Products are under the following circumstances, they are not within the scope of warranty service, ZWO may provide maintenance services to the Users:
1) The Warranty Period of the Products has expired; or
2) The Products are injected into liquid or affected by moisture or corrosion; or
3) The Products are damaged by an external force (such as the broken of the camera protection window glass, the deformation of the product shell, the broken of the USB port, etc.); or
4) Disassembling, repairing by a third party, refurbishment of the Products (such as downloading erroneous firmware) without the written authorization of ZWO; or
5) The product system is modified, or the maintenance notice is lost or changed; or
6) Product quality problem caused by installation not following the requirements or instructions for the Products; or
7) Physical damage or failure of the Products caused by the force majeure (such as strong vibration or extrusion such as flood, fire, earthquake, or thunder stroke); or
8)Damage caused by the improper User operation during the period of shooting or use, such as using without the equipment protection or direct shooting of the sun; or
9) No valid purchase invoice or warranty certificate; or
10) The Products are second-hand products.
Any quality problem with the accessories or other parts of the Products is not a condition for the return or change of the Products, and the User may solely request to replace the accessories with new ones, which shall be handled after verification by ZWO support team.
If the issue with your ZWO product was caused by certain damage (such as severe damage not covered by the 2-year warranty), you might have to pay the replacement value.

4. For the normal repair or replacement of the Products during the Warranty Period, the User will bear the return cost. When returning the Products, Users shall specify the actual reasons for the damage to the Products, and shall provide the corresponding valid certificates, such as pictures or videos, etc.
For the Products that need to be replaced after being confirmed by ZWO in writing, the User shall return the Products with the complete package, together with all accessories, manuals, etc., to the address designated by ZWO.
By sending back the product to ZWO, the User agrees to pay out-of-warranty fees that may arise during the repair process of the product. ZWO will send back the product after charging.

5. If a User encounters any problem during the use of ZWO Products, you may at any time contact ZWO for technical support via ZWO Support.

For the Products that need to be returned for after-sales service, ZWO will provide the corresponding RMA code for reference.
ZWO will not accept any products having no RMA code that have been returned privately without ZWO written confirmation.

6. If a User purchases the ZWO Products from a ZWO agent, the User may contact the ZWO agent directly for the relevant after-sales service.

Our website is always updated with the most recent camera drivers as well as software for DSO and planetary imaging. Please make sure the most recent driver and software has been installed before you start shooting:

It is also recommended to read the Manuals first before shooting.

Do you have question, answer or comment? Post here!

  1. Avatar

    :

    Hi there, love ZWO products! Can you confirm if this camera is supported on latest firmware update of ASIAir Pro?

    Thank you

    Prashant




    0



    0
    • Avatar

      :

      Definitely




      0



      0
  2. Avatar

    :

    I’m really confused as for how many megapixels with camera has. Maybe because I don’t know anything about AP, but… I read these lines in several parts of the description and I think there must be an error or something!
    “Total of 1 megapixel accommodating a resolution of 1936*1096”
    “Resolution: 21 Mega Pixels, 1936*1096”
    Then, in a table that is actually an image, it says 2.1 MP.

    Which one is correct? or are all correct in different ways?

    Thanks!




    0



    0
    • Avatar

      :

      Truly sorry for the mistake.
      The 2.1 MP is correct, we will update our website asap.




      0



      0
  3. Avatar

    (verified owner):

    I just purchased the 462mc + CH4 filter. Is it normal that when i attach the filter its all dark when pointing for example to Jupiter? Am i doing something wrong?




    0



    0
    • Avatar

      :

      1 Make sure the target is in the field of view.
      2 Increase the exposure time and gain.




      0



      0
  4. Avatar

    :

    How does the 462MC stack up against the 224MC for imaging planets? I have seen the specs for both but am interested in knowing if the 462 can be called an upgrade or improved on the 224. Thanks!




    0



    0
    • Avatar

      :

      The 462MC is better that 224MC,462 is considered as the highly improved version of ASI290MC.




      0



      0
  5. Avatar

    :

    I want to continue to make pictures of planets , moon and small DS objects, with a newton 200/1000.
    I want to replace my 120MC. I tried a 224MC. Both are good .
    I hesitate between 185MC and 462MC. Are they supported by Sharcapture ?
    Wich one is the best for me ? another one (under 500€) ?




    0



    0
    • Avatar

      :

      I think the ASI462MC is suitable for you.




      0



      0
  6. Avatar

    :

    Hello
    I’m interested in it’s near infrared capability.
    With IR pass filter, I think we can image galaxy even in light polluted area
    So, I want Pro/Cool version as well.
    Do you have any plan for that?




    0



    0
    • Avatar

      :

      There is no such plan(Pro/Cool version for 462).




      0



      0
  7. Avatar

    :

    Can i use this camera and the supplied 2.1mm lens for sunsets without a solar filter?




    0



    0
    • Avatar

      :

      I think you still need the solar filter.




      0



      1
  8. Avatar

    :

    Is it already compatible with ASI AIR PRO?




    0



    0
    • Avatar

      :

      Yes, of course.




      0



      0
  9. Avatar

    :

    Hi,
    I’m trying to connect my ASI462 to PhD2 on my mac but PhD2 doesn’t detect the camera. What should I do?
    thank you




    0



    0
    • Avatar

      :

      You should check if it can be recognized in ASIStudio first.




      0



      0
  10. Avatar

    :

    The QE plot only goes up to 1000 nm, whereas there is probably significant QE up to and even slightly above 1100nm. Can you share a plot that shows the QE all the way up to the longest wavelength at which the QE is essentially 0? What is the transmission plot of the AR coated camera window? Is the AR window open to 1100 nm?




    0



    0
  11. Avatar

    :

    Hello,
    wich filter can i purchase for better moon photos? UV/IR filter or other? Thanks. Antonio




    0



    0

Add new