Holder Ring for ASI Cooled Cameras(78mm diameters)

$36.00

New version is available now!

Out of stock

SKU: ZWO-RINGD78 Category:

Product Description

This holder ring suitable for all ASI cooled cameras whose diameters is 78mm except ASI094, ASI128 & ASI071holder1200x1000

there is 1/4″ screw under the holder, so you can mount the camera to tripod

 

holderring1200x1200

holder3_1200x1000  holderring1200x1200

 

Our website is always updated with the most recent camera drivers as well as software for DSO and planetary imaging. Please make sure the most recent driver and software has been installed before you start shooting:

It is also recommended to read the Manuals first before shooting.

Shipping

Fast Shipping: we will choose DHL, UPS, FedEx etc to deliver it. Usually you will get your package within 7-14 days.

  • Fast Shipping(amount ≧ 199USD) for free
  • Fast Shipping(amount < 199USD) : $20.00 (We do not provide free shipping from now on.)

Introduction

  1. It will take around 60-90 days for shipment via ePacket/China Post Registered Air Mail/EMS, which can’t be guaranteed due to force majeure. If you can’t get the air mail package after 2months, please let us know ASAP: info@zwoptical.com
  2. Customers from Brazil and Chile should leave a message to provide your CPF or CNPJ as your custom needs it.
  3. Customers from Russia need to provide the complete English name with three words as well as the English shipping address.

Tracking site

DGM: http://webtrack.dhlglobalmail.com/?locale=en-US

China air mail: http://www.17track.net/en

 

Tax

  • The price list on our website is USD without tax.
  • Please note that buyers are liable to pay tax involved, such as Import tax, VAT , customs handling fee, etc. The additional fees may be collected at time of delivery by courier.
  • For best local service we advise customers buy our cameras form local dealers.

Warranty and Return Policy

1. ZWO will provide a 2-year free warranty service (Warranty Period) for ZWO products purchased by Users from ZWO (“Products”) in accordance with this Policy, commencing on the day following receipt of the Products by Users. For ASIAIR Plus users, commencing on the day of device activation.

2. If a User encounters the following Dead on Arrival (DOA) and contacts ZWO within the corresponding time limit to issue the Product purchase invoice and relevant evidence, ZWO will provide door-to-door pick-up service and, as appropriate, after-sale replacement (or partial replacement), repair or return (or partial return) service for the following Products:
1) Product quality problem
Provided that a User detects a quality problem and contacts ZWO within 30 days after receipt of the Products, and ZWO support team confirms that the Products indeed have a quality problem or defect after their inspection, ZWO will provide free replacement service towards such Products;
2) Product transportation problem
Provided that a User finds obvious signs of bubbling, serious overstocking, or deformation on the outer package of the Products upon receipt of the Products, and provides ZWO with pictures of the outer package and proof of receipt within 3 days after receipt of such Products, ZWO support team will verify the actual shipper and determine the responsible party for such transportation problem. In the event that ZWO is the actual shipper, ZWO will be responsible for providing the relevant return or replacement service, however, if the Products are directly sold or transported to the User by an agent of ZWO, the agent will be responsible for providing the relevant return or replacement service.

3. If the Products are under the following circumstances, they are not within the scope of warranty service, ZWO may provide maintenance services to the Users:
1) The Warranty Period of the Products has expired; or
2) The Products are injected into liquid or affected by moisture or corrosion; or
3) The Products are damaged by an external force (such as the broken of the camera protection window glass, the deformation of the product shell, the broken of the USB port, etc.); or
4) Disassembling, repairing by a third party, refurbishment of the Products (such as downloading erroneous firmware) without the written authorization of ZWO; or
5) The product system is modified, or the maintenance notice is lost or changed; or
6) Product quality problem caused by installation not following the requirements or instructions for the Products; or
7) Physical damage or failure of the Products caused by the force majeure (such as strong vibration or extrusion such as flood, fire, earthquake, or thunder stroke); or
8)Damage caused by the improper User operation during the period of shooting or use, such as using without the equipment protection or direct shooting of the sun; or
9) No valid purchase invoice or warranty certificate; or
10) The Products are second-hand products.
Any quality problem with the accessories or other parts of the Products is not a condition for the return or change of the Products, and the User may solely request to replace the accessories with new ones, which shall be handled after verification by ZWO support team.
If the issue with your ZWO product was caused by certain damage (such as severe damage not covered by the 2-year warranty), you might have to pay the replacement value.

4. For the normal repair or replacement of the Products during the Warranty Period, the User will bear the return cost. When returning the Products, Users shall specify the actual reasons for the damage to the Products, and shall provide the corresponding valid certificates, such as pictures or videos, etc.
For the Products that need to be replaced after being confirmed by ZWO in writing, the User shall return the Products with the complete package, together with all accessories, manuals, etc., to the address designated by ZWO.
By sending back the product to ZWO, the User agrees to pay out-of-warranty fees that may arise during the repair process of the product. ZWO will send back the product after charging.

5. If a User encounters any problem during the use of ZWO Products, you may at any time contact ZWO for technical support via ZWO Support.

For the Products that need to be returned for after-sales service, ZWO will provide the corresponding RMA code for reference.
ZWO will not accept any products having no RMA code that have been returned privately without ZWO written confirmation.

6. If a User purchases the ZWO Products from a ZWO agent, the User may contact the ZWO agent directly for the relevant after-sales service.

Do you have question, answer or comment? Post here!

  1. Avatar

    (verified owner):

    Will there be a 86mm version coming out for Pro Cameras?




    0



    0
    • Avatar

      :

      Yes, we already have samples. It will release soon.




      0



      0
  2. Avatar

    :

    Do you have some type of mount for the Un-Cooled Camera that have mounting holes in the backs of the camera’s like the ASI185MC. Really need to get one.




    0



    0
    • Sam Wen

      :

      you can mount they directly with the 1/4″ screw




      0



      0
  3. Avatar

    :

    Does this have a dimensioned drawing yet? I would like to model the actual size or at least get some basic specifications.

    Thanks




    0



    0
    • Sam Wen

      :

      sorry, there is no such drawing
      the inner diameter of this ring is 78mm




      0



      0
  4. Avatar

    :

    Why this holder ring is under “Recommanded Accessories” on the website for the ASI071 and the article text clearly say, this holder ring is NOT for the ASI071? And which holder ring is for the ASI071, there is no other one. The same unclear information on the EOS adapters, don’t list back focus distances! These are your adapters and your cameras, please list the compatible cameras in the detailed information of every adapter. It would be much easier.




    0



    0
    • Avatar

      :

      It’s a mistake, we will fix that soon.




      0



      0
  5. Avatar

    :

    Is it possible to attach this holder ring to asi120mm with samyang 85mm lens to mount this on a dovetail with 1/4″ screw to shoot widefields?




    0



    0
    • Sam Wen

      :

      no, this hold ring is only for cooled cameras
      you may need one ring to mount your lens




      0



      0
  6. Avatar

    :

    Hi,

    Is this holder suitable for ASI 178 MM-C ?




    0



    0
    • Sam Wen

      :

      yes, you can use it




      0



      0
  7. Avatar

    (verified owner):

    Yes I know. What I want to know is if we connect the camera to the tripod like that and filterwheel and Rokinon 35mm lens attached to the front of the camera, then will that be too much stain on front T thread of the camera.




    0



    0
    • Sam Wen

      :

      I think 35mm lens is not very heavy, it should be balance




      0



      0
  8. Avatar

    (verified owner):

    Can this be used to mount the camera to a telescope mount with filter wheel and Rokinon 14mm or 35mm lens attached to the front of the camera? Will that be too much weight?




    0



    0
    • Sam Wen

      :

      this is used to mount the camera to a tripod, there 1/4″ screw under the hold ring




      0



      0
  9. Avatar

    :

    Is it possible to get a dimensional drawing? what material is it made of? what is its weight?

    Thanks.




    0



    0
    • Sam Wen

      :

      it is made of Aluminum, very light weight
      no drawing available yet




      0



      0
  10. Avatar

    :

    it’s also possible to use for ASI178MC ???

    Thanks
    …Jub




    0



    0
    • Sam Wen

      :

      no, 178MC has 1/4″ screw in the back




      0



      0
  11. Avatar

    :

    will the holder ring work with the ASI 120 mono?if not, is there any other way to be able to attach it to a tripod?




    0



    0
    • Sam Wen

      :

      there is 1/4″ screw under 120 house
      so no holder ring needed




      0



      0

Add new

Recommended Accessories