New Holder Ring for ASI Cooled cameras (90mm diameter)

Product Description

Product name: D90 Holder Ring for ASI Cooled cameras

Product : 90mm diameter

Currently compatible with ASI 2600MM/MC Pro and ASI6200MM/MC Pro cameras.

Note:

1. Cameras with large format like ASI094MC Pro, ASI128MC Pro and ASI071MC Pro require the D86 Holder Ring (80mm diameter).

2. D78 Holder Ring for ASI Cooled cameras is compatible with following ZWO cameras:

ASI1600 Pro cameras, ASI183 Pro cameras, ASI294MC Pro, ASI178 Cooled cameras, ASI174 Cooled cameras and ASI385MC cooled.

3. To easily mount the camera onto the tripod, simply loosen the M6 screw on the holder ring. Done!

Mechanical Diagram

企业微信截图_16234102064587

Our website is continuously updated with the most recent camera drivers as well as software for DSO and planetary imaging. Please make sure the most recent Driver and software have been installed before you start shooting:

It is also recommended to read the Manuals first before shooting.

Do you have question, answer or comment? Post here!

Marc – August 28, 2021:

Hi – can the base plate (Arca Swiss) be removed and changed for e.g. Vixen/GP level? It seems that it should come apart with one 1/4″ screw , but those details are not clear from the images.

0

0
- sara.liu – September 9, 2021:
  
  The base plate can be removed by loosing the screws.
  
  0
  
  0
ricardinho – May 28, 2021:

This product is very dangerous and causes the fall of camera and lens.

Yes, unfortunately.

Because it has a very thin dovetail, it doesn’t stick very well in vixen pattern mounts.

Apparently the mounts get caught. However, when pulled from the side, they easily come out of the mount and fall off.

I had the fall of an asi6200mm and a Samyang 135mm lens dropped and the lens broken, because of that. Of course, ZWO will not pay me for the broken lens. Luckily, my expensive camera did not break, although I suspect that the sensor is displaced in relation to the lens now.

Take great care and please build a thicker normal vixen dovetais.

0

0
- sara.liu – June 11, 2021:
  
  The holder ring is not suitable for vixen mounts, recommend you to use a standard dove plate; )
  
  0
  
  0
Florent – May 24, 2021:

I would like to know the width of the ring. There is no information on your diagram. Thanks.

0

0
- sara.liu – June 11, 2021:
  
  We updated the diagram, the width has been added; )
  
  0
  
  0
Jürgen – April 25, 2021:

How broad is the holder ring? I mean band which is connected to the telescope.
Thank you very much for your troubles.
Kind regards,
Jürgen

0

0
- Support@ZWO – April 26, 2021:
  
  I don’t understand your question, but I think you only need to pay attention to the camera model.
  
  0
  
  0
Iftah Saar – December 15, 2020:

Can I use this holder with my camera mount? I have Manfrotto XPRO Ball Head in magnesium with 200PL plate.

0

0
- Support@ZWO – December 16, 2020:
  
  Normally, if the hole location match, it can be supported.
  
  0
  
  0
Ali – August 3, 2020:

Hello,
Is it compatible with ASI 2600MC pro ?

Thanks 🙂

0

0
- ZWO.Moson – August 4, 2020:
  
  Yes, this holder ring is compatible with ASI2600MC pro.
  
  0
  
  0
PP – May 29, 2020:

Can this be used with the ASI533MC pro camera?

0

0
- Moson – June 1, 2020:
  
  Sorry this Holder Ring can not compatible with ASI533MC, you could use 78mm Holder Ring for ASI533MC.
  
  0
  
  0