New T2 Tilter

$48.00

The New T2 tilter is available!

SKU: ZWO T2-Tilter-Ⅱ Category:

Product Description

The New T2 tilter adds multiple screw holes to help connect to ZWO EFW (compatible to 2” EFW filter wheel).

New ZWO T2 tilter-1

Package and size

Main body:Diameter 78mm,11mm without the T2-T2 adapter

T2-T2 adapter:Thickness 2mm

Interface: T2 (M42*0.75 thread) each side

 

Product usage

  1. Mainly used to reduce newton ring when imaging ha-solar;
  2. Also used to adjust the camera imaging plane by rotating the six bolts in the main camera body when the sensor plane is uneven.

New ZWO T2 tilter-2

Applicable cameras

All ASI cameras except ASI071, ASI2600 and ASI6200.

 

Connection method

1. Cooled camera: ASI294/ASI1600/ASI183/ASI533

New ZWO T2 tilter-3 New ZWO T2 tilter-4

2. Non-cooled camera:

ASI294/ASI1600/ASI183/ASI174

These cameras do not need to connect to the T2-T2 adapter

New ZWO T2 tilter-5

ASI178/ASI290/ASI224/ASI120

These cameras need to connect to the T2-T2 adapter first.

ASI178 T2-Tilter-1 ASI178 T2-Tilter-2

Mechanical drawing

New ZWO T2 tilter-7

What’s in the box?

New ZWO T2 tilter-8

T2 tilter *1

T2-T2 adapter *1

Hexagon wrench *1

Our website is always updated with the most recent camera drivers as well as software for DSO and planetary imaging. Please make sure the most recent driver and software has been installed before you start shooting:

It is also recommended to read the Manuals first before shooting.

Shipping

Fast Shipping: we will choose DHL, UPS, FedEx etc to deliver it. Usually you will get your package within 7-14 days.

  • Fast Shipping(amount ≧ 199USD) for free
  • Fast Shipping(amount < 199USD) : $20.00 (We do not provide free shipping from now on.)

Introduction

  1. It will take around 60-90 days for shipment via ePacket/China Post Registered Air Mail/EMS, which can’t be guaranteed due to force majeure. If you can’t get the air mail package after 2months, please let us know ASAP: info@zwoptical.com
  2. Customers from Brazil and Chile should leave a message to provide your CPF or CNPJ as your custom needs it.
  3. Customers from Russia need to provide the complete English name with three words as well as the English shipping address.

Tracking site

DGM: http://webtrack.dhlglobalmail.com/?locale=en-US

China air mail: http://www.17track.net/en

 

Tax

  • The price list on our website is USD without tax.
  • Please note that buyers are liable to pay tax involved, such as Import tax, VAT , customs handling fee, etc. The additional fees may be collected at time of delivery by courier.
  • For best local service we advise customers buy our cameras form local dealers.

Warranty and Return Policy

1. ZWO will provide a 2-year free warranty service (Warranty Period) for ZWO products purchased by Users from ZWO (“Products”) in accordance with this Policy, commencing on the day following receipt of the Products by Users. For ASIAIR Plus users, commencing on the day of device activation.

2. If a User encounters the following Dead on Arrival (DOA) and contacts ZWO within the corresponding time limit to issue the Product purchase invoice and relevant evidence, ZWO will provide door-to-door pick-up service and, as appropriate, after-sale replacement (or partial replacement), repair or return (or partial return) service for the following Products:
1) Product quality problem
Provided that a User detects a quality problem and contacts ZWO within 30 days after receipt of the Products, and ZWO support team confirms that the Products indeed have a quality problem or defect after their inspection, ZWO will provide free replacement service towards such Products;
2) Product transportation problem
Provided that a User finds obvious signs of bubbling, serious overstocking, or deformation on the outer package of the Products upon receipt of the Products, and provides ZWO with pictures of the outer package and proof of receipt within 3 days after receipt of such Products, ZWO support team will verify the actual shipper and determine the responsible party for such transportation problem. In the event that ZWO is the actual shipper, ZWO will be responsible for providing the relevant return or replacement service, however, if the Products are directly sold or transported to the User by an agent of ZWO, the agent will be responsible for providing the relevant return or replacement service.

3. If the Products are under the following circumstances, they are not within the scope of warranty service, ZWO may provide maintenance services to the Users:
1) The Warranty Period of the Products has expired; or
2) The Products are injected into liquid or affected by moisture or corrosion; or
3) The Products are damaged by an external force (such as the broken of the camera protection window glass, the deformation of the product shell, the broken of the USB port, etc.); or
4) Disassembling, repairing by a third party, refurbishment of the Products (such as downloading erroneous firmware) without the written authorization of ZWO; or
5) The product system is modified, or the maintenance notice is lost or changed; or
6) Product quality problem caused by installation not following the requirements or instructions for the Products; or
7) Physical damage or failure of the Products caused by the force majeure (such as strong vibration or extrusion such as flood, fire, earthquake, or thunder stroke); or
8)Damage caused by the improper User operation during the period of shooting or use, such as using without the equipment protection or direct shooting of the sun; or
9) No valid purchase invoice or warranty certificate; or
10) The Products are second-hand products.
Any quality problem with the accessories or other parts of the Products is not a condition for the return or change of the Products, and the User may solely request to replace the accessories with new ones, which shall be handled after verification by ZWO support team.
If the issue with your ZWO product was caused by certain damage (such as severe damage not covered by the 2-year warranty), you might have to pay the replacement value.

4. For the normal repair or replacement of the Products during the Warranty Period, the User will bear the return cost. When returning the Products, Users shall specify the actual reasons for the damage to the Products, and shall provide the corresponding valid certificates, such as pictures or videos, etc.
For the Products that need to be replaced after being confirmed by ZWO in writing, the User shall return the Products with the complete package, together with all accessories, manuals, etc., to the address designated by ZWO.
By sending back the product to ZWO, the User agrees to pay out-of-warranty fees that may arise during the repair process of the product. ZWO will send back the product after charging.

5. If a User encounters any problem during the use of ZWO Products, you may at any time contact ZWO for technical support via ZWO Support.

For the Products that need to be returned for after-sales service, ZWO will provide the corresponding RMA code for reference.
ZWO will not accept any products having no RMA code that have been returned privately without ZWO written confirmation.

6. If a User purchases the ZWO Products from a ZWO agent, the User may contact the ZWO agent directly for the relevant after-sales service.

Do you have question, answer or comment? Post here!

  1. Avatar

    :

    I just purchased the T2 Tilter for Ha imaging. I see how to connect it but there are no instructions on how to use it.
    Which hex nuts do you move? How much? Is this done once and you’re good forever or do you readjust every time? You need to publish some instructions on how to use this. How do I proceed?




    0



    0
    • Avatar

      :

      1.Mainly used to reduce newton ring when imaging ha-solar;
      2.Also used to adjust the camera imaging plane by rotating the six nuts in the main body when the sensor plane is uneven.
      3.There is no instruction because you need to adjust until it is even based on actual state.




      0



      0
  2. Avatar

    :

    What type of Allen screws are they for both pairs of screws per set? For example M6, M5 or 1/4-20 etc.. I am curious because I am using this with a Quark Daystar Chromosphere and ZWo174mm and I have Newton Rings. And I am curious about how far the camera can tilt with this? I did not see any pictures of it tilting or information of the screw sizes/pitch/thread etc…

    So with that said, I just want to know if I were to add longer screws, would I have more tilt room or should the supplied screws be adequate enough to eliminate the Newton Rings I have with the 174mm?

    Thanks in Advanced :)




    0



    0
    • Avatar

      :

      The supplied screws should be adequate.




      0



      0
  3. Avatar

    :

    What is the available tilt range with this adapter – in degrees?




    0



    0
    • Avatar

      :

      We don’t have such parameter.




      0



      0
  4. Avatar

    :

    Will this bolt to the telescope side of the new model 7x36mm EFW instead of bolting it directly to the camera?




    0



    0
    • Avatar

      :

      This is for 2” EFW filter wheel.




      0



      0
  5. Avatar

    :

    Will this bolt to the telescope side of the new 7x36mm EFW? I am using this wheel bolted to ASI2600MM, the tilt plate removed from camera will not bolt to the other side of the EFW. I am not using OAG.

    Thanks




    0



    0
    • Avatar

      :

      Applicable cameras
      All ASI cameras except ASI071, ASI2600 and ASI6200.




      0



      0
  6. Avatar

    :

    I want to screw the tilt adapter to the ZWO 7×2 efw, which screws do I use? The ones provided with the efw don’t seem to work. Do you have a clearer manual for this other than the back focus diagram?




    0



    0
    • Avatar

      :

      Please contact support@zwoptical.com and we can send you some detailed pictures.




      0



      0
  7. Avatar

    :

    I suspect my ASI294 to have a tilt problem… tested with many telescopes, in the range of f/6, I always have elongated stars in one corner of the frame or on the same side of the frame. Shots taken with a f/7.5 telescope are perfect all over the frame… Do you have design a manual with more information on the use of this T2 tilter? Many thanks for reading. AC




    0



    0
  8. Avatar

    :

    How does this connect an ASI1600MM-Pro with a ZWO 2″ EFW? Are screws connecting it to the camera or the EFW or both?




    0



    0
    • Avatar

      :

      You can connect it to ASI1600MM Pro by screws. And connect to 2″ EFW by M54-M42 adapter which come with 2″ EFW.




      0



      0
  9. Avatar

    :

    Can this be used on an f/4 Newtonian with EFW. Would I get a vignette with camera being further back, or would I put the tilter in place of one of the spacers??




    0



    0
    • Avatar

      :

      Normally it can be attached to the camera, you can check your telescope image circle to confirm whether it will have a vignette.




      0



      0
  10. Avatar

    :

    Does it have a seal in the middle so that dust will not enter when the tilt is set?




    0



    0
    • Avatar

      :

      Sorry this T2 Tilter does not have a seal.




      0



      0
  11. Avatar

    :

    Does this work as a replacement of the 11mm spacer between the EFW and the OAG?




    0



    0
    • Avatar

      :

      Yes, this New T2 Tilter can replace the spacer between the EFW and the OAG.




      0



      0

Add new