UV IR CUT filter – 2″

View Cart “ZWO EFWmini (5 x 1.25″or 5 x 31mm)” has been added to your cart.

$49.00

SKU: ZWO IRCUT2 Category:

Product Description

ZWO 2″ IR-cut UV filter is suitable for color camera with AR protect window.

The ZWO IR-Cut Filter blocks infrared light from reaching the sensor of your CCD or CMOS camera or your expensive H-alpha filter. When imaging, the addition of this simple and inexpensive accessory will result in sharper images, and when doing solar work, the IR Cut Filter will your protect H-alpha filter from the damaging effects of infrared radiation.

Infrared or IR light is invisible to the human eye, and so even though most telescopes are not designed to focus IR light, it does not matter when you are using your telescope visually. However, when you add a camera to the mix, its a whole other story! Unlike the human eye, a silicon sensor is very sensitive to light in the infrared portion of the spectrum, and that is a problem because infrared images are blurry as all get out. That means your nice, sharp visual light image is degraded by the addition of the infrared layer. This problem can easily be solved by blocking the infrared, and the ZWO IR-Cut filter will do just that.

The ZWO IR-Cut filter is housed in a 2″ cell. The filter comes with a protective plastic case.

Technical Parameter:

Name: IR-cut filter

Size: 2″

Thickness: 5mm+2mm(Thread)

Thread: M48*0.75 male thread

03

 

0405

06

 

IR-Window-graph

Our website is always updated with the most recent camera drivers as well as software for DSO and planetary imaging. Please make sure the most recent driver and software has been installed before you start shooting:

It is also recommended to read the Manuals first before shooting.

Shipping

Fast Shipping: we will choose DHL, UPS, FedEx etc to deliver it. Usually you will get your package within 7-14 days.

  • Fast Shipping(amount ≧ 199USD) for free
  • Fast Shipping(amount < 199USD) : $20.00 (We do not provide free shipping from now on.)

Introduction

  1. It will take around 60-90 days for shipment via ePacket/China Post Registered Air Mail/EMS, which can’t be guaranteed due to force majeure. If you can’t get the air mail package after 2months, please let us know ASAP: info@zwoptical.com
  2. Customers from Brazil and Chile should leave a message to provide your CPF or CNPJ as your custom needs it.
  3. Customers from Russia need to provide the complete English name with three words as well as the English shipping address.

Tracking site

DGM: http://webtrack.dhlglobalmail.com/?locale=en-US

China air mail: http://www.17track.net/en

 

Tax

  • The price list on our website is USD without tax.
  • Please note that buyers are liable to pay tax involved, such as Import tax, VAT , customs handling fee, etc. The additional fees may be collected at time of delivery by courier.
  • For best local service we advise customers buy our cameras form local dealers.

Warranty and Return Policy

1. ZWO will provide a 2-year free warranty service (Warranty Period) for ZWO products purchased by Users from ZWO (“Products”) in accordance with this Policy, commencing on the day following receipt of the Products by Users. For ASIAIR Plus users, commencing on the day of device activation.

2. If a User encounters the following Dead on Arrival (DOA) and contacts ZWO within the corresponding time limit to issue the Product purchase invoice and relevant evidence, ZWO will provide door-to-door pick-up service and, as appropriate, after-sale replacement (or partial replacement), repair or return (or partial return) service for the following Products:
1) Product quality problem
Provided that a User detects a quality problem and contacts ZWO within 30 days after receipt of the Products, and ZWO support team confirms that the Products indeed have a quality problem or defect after their inspection, ZWO will provide free replacement service towards such Products;
2) Product transportation problem
Provided that a User finds obvious signs of bubbling, serious overstocking, or deformation on the outer package of the Products upon receipt of the Products, and provides ZWO with pictures of the outer package and proof of receipt within 3 days after receipt of such Products, ZWO support team will verify the actual shipper and determine the responsible party for such transportation problem. In the event that ZWO is the actual shipper, ZWO will be responsible for providing the relevant return or replacement service, however, if the Products are directly sold or transported to the User by an agent of ZWO, the agent will be responsible for providing the relevant return or replacement service.

3. If the Products are under the following circumstances, they are not within the scope of warranty service, ZWO may provide maintenance services to the Users:
1) The Warranty Period of the Products has expired; or
2) The Products are injected into liquid or affected by moisture or corrosion; or
3) The Products are damaged by an external force (such as the broken of the camera protection window glass, the deformation of the product shell, the broken of the USB port, etc.); or
4) Disassembling, repairing by a third party, refurbishment of the Products (such as downloading erroneous firmware) without the written authorization of ZWO; or
5) The product system is modified, or the maintenance notice is lost or changed; or
6) Product quality problem caused by installation not following the requirements or instructions for the Products; or
7) Physical damage or failure of the Products caused by the force majeure (such as strong vibration or extrusion such as flood, fire, earthquake, or thunder stroke); or
8)Damage caused by the improper User operation during the period of shooting or use, such as using without the equipment protection or direct shooting of the sun; or
9) No valid purchase invoice or warranty certificate; or
10) The Products are second-hand products.
Any quality problem with the accessories or other parts of the Products is not a condition for the return or change of the Products, and the User may solely request to replace the accessories with new ones, which shall be handled after verification by ZWO support team.
If the issue with your ZWO product was caused by certain damage (such as severe damage not covered by the 2-year warranty), you might have to pay the replacement value.

4. For the normal repair or replacement of the Products during the Warranty Period, the User will bear the return cost. When returning the Products, Users shall specify the actual reasons for the damage to the Products, and shall provide the corresponding valid certificates, such as pictures or videos, etc.
For the Products that need to be replaced after being confirmed by ZWO in writing, the User shall return the Products with the complete package, together with all accessories, manuals, etc., to the address designated by ZWO.
By sending back the product to ZWO, the User agrees to pay out-of-warranty fees that may arise during the repair process of the product. ZWO will send back the product after charging.

5. If a User encounters any problem during the use of ZWO Products, you may at any time contact ZWO for technical support via ZWO Support.

For the Products that need to be returned for after-sales service, ZWO will provide the corresponding RMA code for reference.
ZWO will not accept any products having no RMA code that have been returned privately without ZWO written confirmation.

6. If a User purchases the ZWO Products from a ZWO agent, the User may contact the ZWO agent directly for the relevant after-sales service.

Do you have question, answer or comment? Post here!

  1. Avatar

    :

    Hello, will this filter work as a lum filter for the 533MC-Pro? Thanks




    0



    0
    • Avatar

      :

      Yes, it is OK.




      0



      0
  2. Avatar

    :

    I don’t see a pressure ring. There is a retaining ring on the female M48 thread side which holds the filter glass in place, and that is the only ring. Can I remove that, or is it cemented in place?




    0



    0
    • Avatar

      :

      Yes,that is the pressure ring.And you can remove it.




      0



      0
  3. Avatar

    :

    Can I remove the retaining ring which holds the filter in place, or is it cemented in place? The ring is too thick, so there are no threads exposed to attach to an M48 male accessory.




    0



    0
    • Avatar

      :

      You don’t have to remove the retaining ring.You can remove the pressure ring,and then the filter can attach an M48.




      0



      0
  4. Avatar

    :

    Thank you for your response but your haven’t answered my main question – is this filter (IRCUT2) an IR cut or IR-UV cut. The graphs suggest it is IR-UV cut as do the photos of the filter but the descriptions suggest only IR Cut and the reseller photos only show an IR-Cut filter. So what is the 2″ filter part number for IR UV Cut ? The more I look into this the more I am confused as are your resellers who describe your filters as either IR Cut or IR-UV Cut and have a mixture of photos of the two.




    1



    0
    • Avatar

      :

      It’s an IR-UV cut




      0



      2
  5. Avatar

    :

    Is this an IR Cut or IR-UV cut filter ? The picture shows IR-UV cut but the description just IR. And all resellers seem to list this product as IR cut only. Very confusing. I am wondering what filter I would need if I buy an 071MC-Pro. Thanks




    1



    0
    • Avatar

      :

      The UV-IR cut filter.




      1



      0
  6. Avatar

    :

    In a previous comment, someone has said you need to find a place to attach filter. What is meant by this? Will it not just screw on any 2″ adapter? I have recently bought 294mc-pro and i need an IR cut filter.




    1



    0
    • Avatar

      :

      We do not have 2 inch filter wheel yet so you need to find another way to fit in the 2 inch filter.




      1



      0
  7. Avatar

    (verified owner):

    What is the thickness of the glass of this filter?




    1



    0
    • Avatar

      :

      1.85mm




      0



      0
  8. Avatar

    :

    Hi

    Is this filter suitable for the 294MC and and 224MC?

    Regards

    Eduardo




    0



    0
    • Avatar

      :

      Yes, but need to find somewhere to attach it.




      0



      0
  9. Avatar

    :

    What is the transmission rate of this cutoff filter




    0



    0
    • Sam Wen

      :

      It’s the same of 1.25″ IR-CUT filter
      we will add it




      0



      0

Add new