ZWO Filter Drawer (M54)

$35.00$99.00

Clear
SKU: FD-M54 Category:

Product Description

The M54 Filter Drawer with 20mm ring design is independently developed by ZWO and specifically made to match with the full-frame cooled camera ZWO ASI6200 and ASI2400.

The double strong magnets create stronger adsorption, easier installation and pulling out.

Screw-M54 filter drawer-ZWO

The M48*0.75 female thread can be used with the 2inch filters.
The M54*0.75 female thread can be used to connect with the telescope.
And the M54*0.75 male thread can be used to connect with the ASI6200 camera.

Strong-agnet-M54-filter-drawer-ZWO1-1

With the ability of double strong magnetic adsorption, it is more convenient and much easier to install or pull out the filter.

Lock screw-M54 filter drawer-ZWO

There is a lock screw on the side of the M54 filter Drawer. The locking function is helpful on adjusting the tension to eliminate the gap, which is a double insurance for users.

FD-M54

There also is a M54-M48-2 adapter coming with the M54 Filter Drawer so that you can use it with your camera or your telescope.

Connection method

FD-M54-1

Mechanical drawing

Mechanical drawing

70mm(height)*70mm(length)*20mm(thickness)
M54*0.75 male(external) thread (camera side)
M48*0.75 female(internal) thread (filter end)
M54*0.75 female(internal) thread (telescope side)
Suitable for 2-inch astronomical filters

The best solution of 55mm back focus length

6200-55mm-backfocus-solution-3 (2)

Note:This solution can only reach 56mm back focus length. If you want 55mm back focus length. Also the M48-M42 adapter will block the camera sensor a little bit. So we recommend you use 2”EFW with M68 OAG:

Click here for more connection methods of ASI6200 to get 55mm back focus length:

https://astronomy-imaging-camera.com/tutorials/5-connection-methods-to-get-55mm-back-focus-length

 

What’s in the box?

what's in the box-M54 filter drawer-ZWO

ZWO M54 filter drawer *1
M54-M48F-2mm adapter *1

Shipping & Delivery

Fast Shipping: we will choose DHL, UPS, FedEx etc to deliver it. Usually you will get your package within 15-20 days.

  • Fast Shipping(amount ≧ 199USD) for free
  • Fast Shipping(amount < 199USD) : $30.00 (We do not provide free shipping from now on.)

Introduction

  1. It will take around 60-90 days for shipment via ePacket/China Post Registered Air Mail/EMS, which can’t be guaranteed due to force majeure. If you can’t get the air mail package after 2months, please let us know ASAP: info@zwoptical.com
  2. Customers from Brazil and Chile should leave a message to provide your CPF or CNPJ as your custom needs it.
  3. Customers from Russia need to provide the complete English name with three words as well as the English shipping address.

Tracking site

DGM: http://webtrack.dhlglobalmail.com/?locale=en-US

China air mail: http://www.17track.net/en

 

Tax

  • The price list on our website is USD without tax.
  • Please note that buyers are liable to pay tax involved, such as Import tax, VAT , customs handling fee, etc. The additional fees may be collected at time of delivery by courier.
  • For best local service we advise customers buy our cameras from local dealers.

 

Warranty & Return

1. ZWO hereby declares that it will provide customers with a warranty period of 2 years for ZWO branded products (excluding APO), as per this policy. APO products will be covered by a 1-year free warranty service, starting from the day following the receipt of the product by the customer. For ASIAIR Plus users, the warranty period will commence from the day of device activation.

2. If a User encounters the following Dead on Arrival (DOA) and contacts ZWO within the corresponding time limit to issue the Product purchase invoice and relevant evidence, ZWO will provide door-to-door pick-up service and, as appropriate, after-sale replacement (or partial replacement), repair or return (or partial return) service for the following Products:
1) Product quality problem
Provided that a User detects a quality problem and contacts ZWO within 30 days after receipt of the Products, and ZWO support team confirms that the Products indeed have a quality problem or defect after their inspection, ZWO will provide free replacement service towards such Products;
2) Product transportation problem
Provided that a User finds obvious signs of bubbling, serious overstocking, or deformation on the outer package of the Products upon receipt of the Products, and provides ZWO with pictures of the outer package and proof of receipt within 3 days after receipt of such Products, ZWO support team will verify the actual shipper and determine the responsible party for such transportation problem. In the event that ZWO is the actual shipper, ZWO will be responsible for providing the relevant return or replacement service, however, if the Products are directly sold or transported to the User by an agent of ZWO, the agent will be responsible for providing the relevant return or replacement service.

3. If the Products are under the following circumstances, they are not within the scope of warranty service, ZWO may provide maintenance services to the Users:
1) The Warranty Period of the Products has expired; or
2) The Products are injected into liquid or affected by moisture or corrosion; or
3) The Products are damaged by an external force (such as the broken of the camera protection window glass, the deformation of the product shell, the broken of the USB port, etc.); or
4) Disassembling, repairing by a third party, refurbishment of the Products (such as downloading erroneous firmware) without the written authorization of ZWO; or
5) The product system is modified, or the maintenance notice is lost or changed; or
6) Product quality problem caused by installation not following the requirements or instructions for the Products; or
7) Physical damage or failure of the Products caused by the force majeure (such as strong vibration or extrusion such as flood, fire, earthquake, or thunder stroke); or
8)Damage caused by the improper User operation during the period of shooting or use, such as using without the equipment protection or direct shooting of the sun; or
9) No valid purchase invoice or warranty certificate; or
10) The Products are second-hand products.
Any quality problem with the accessories or other parts of the Products is not a condition for the return or change of the Products, and the User may solely request to replace the accessories with new ones, which shall be handled after verification by ZWO support team.
If the issue with your ZWO product was caused by certain damage (such as severe damage not covered by the 2-year warranty), you might have to pay the replacement value.

4. For the normal repair or replacement of the Products during the Warranty Period, the User will bear the return cost. When returning the Products, Users shall specify the actual reasons for the damage to the Products, and shall provide the corresponding valid certificates, such as pictures or videos, etc.
For the Products that need to be replaced after being confirmed by ZWO in writing, the User shall return the Products with the complete package, together with all accessories, manuals, etc., to the address designated by ZWO.
By sending back the product to ZWO, the User agrees to pay out-of-warranty fees that may arise during the repair process of the product. ZWO will send back the product after charging.

5. If a User encounters any problem during the use of ZWO Products, you may at any time contact ZWO for technical support via ZWO Support.

For the Products that need to be returned for after-sales service, ZWO will provide the corresponding RMA code for reference.
ZWO will not accept any products having no RMA code that have been returned privately without ZWO written confirmation.

6. If a User purchases the ZWO Products from a ZWO agent, the User may contact the ZWO agent directly for the relevant after-sales service.

Do you have question, answer or comment? Post here!

  1. Avatar

    :

    I use RASA 11 and ASI 6200MM and I want to minimize vignetting.

    Is there a way to attach filter drawer directly to camera body?
    Is there a way to use the following setup order: tilt adapter + filter drawer + camera body?

    All the best




    0



    0
    • Avatar

      :

      Hello! Is your issue resolved? If not, please email us at support@zwoptical.com with further details. If your issue has been resolved or if you have any other questions, feel free to contact us anytime. Thank you for your message and support!




      0



      0
  2. Avatar

    :

    Hello,
    some precision about my previous question relative to the M54 filter drawer be used with the ASI2400MC-Pro camera and the OAG-L.
    As far as I understand, it is mechanically compatible, but it will add 5mm on the image train:
    – ASI2400MC-Pro camera with 5mm adapter = 17.5mm
    – M54 filter drawer = 20mm
    – OAG-L with 5mm adapter = 17.5 + 5 mm
    Total = 60mm instead of the standard 55mm
    For my configuration (Celestron 11 EdgeHD) it is not a problem, I wiil replace the standard 91.05mm Celestron Adapter with Something shorter.
    Is it correct ?
    Thanks and regards




    0



    0
    • Avatar

      :

      We are not sure if it is compatible, if you can connect, please share the result with us and we will share it with other customers.:)




      0



      0
  3. Avatar

    :

    Hello,
    Can the M54 filter drawer be used with the ASI2400MC-Pro camera and the OAG-L ?
    If not, are there other solutions to insert M54 filters between the ASI2400MC-Pro camera and the OAG-L ?
    Regards




    0



    0
  4. Avatar

    :

    Hello. How can I use 50mm round filters for FF camera (6200)? What is the aim to produce slider with vignetting for your top cameras?




    0



    0
  5. Avatar

    :

    Does the Filter Holder come in any kind of protective case, or is it just wrapped in plastic/bubble wrap? I have a light pollution filter and plan to also buy a duo narrowband filter. My idea is to buy the Filter Drawer and additional Filter Holder. I will install the filters in each Filter Holder so I can easily swap out but would like to have the Filter Holder in a case to protect the filter from dust and scratches.
    I had a hard time searching online for cases for Filter Holders. I mostly found cases for 2″ filters only that would be too small with the Filter Holder.
    Baader has a 3D printable case for their Filter Holder: https://www.baader-planetarium.com/en/blog/free-download-3d-printable-ufc-case-for-filter-sliders/

    Thanks.




    0



    0
    • Avatar

      :

      Hello
      Filter Holder come in plastic box
      thanks for the feedback and suggestion




      0



      0
  6. Avatar

    :

    Can this filter drawer be used with an ASI2600MC?




    0



    0
    • Avatar

      :

      2600MC use M42 Filter Drawer.




      0



      0
  7. Avatar

    :

    Hello,
    Does the camera side have female threads inside the male m54 thread (looks like there is in one of the pictures, but hard to tell)? If so, what size? Thanks.




    0



    0
    • Avatar

      :

      Yes, m54 female threads. Please make sure it matches with your camera.




      0



      0
  8. Avatar

    :

    Will this work with on the Celestron RASA with ASI6200MM Pro?




    0



    0
    • Avatar

      :

      You can check if the thread of your telescope is M54*0.75.




      0



      0
  9. Avatar

    :

    What’s the difference between ZWO-FD-M54 , ZWO-FL-HLDR-M54, and ZWO-FL-HLDR-M54*3?




    0



    0
    • Avatar

      :

      option 1: ZWO-FD-M54 means you choose only one M54 filter drawer
      option 2: ZWO-FL-HLDR-M54 means you choose only one filter holder and not include filter drawer
      option 3: ZWO-FL-HLDR-M54*3 means you choose three filter holders and not include filter drawer




      0



      0
    • Avatar

      :

      Sorry I have made a mistake before, and I have modify the comment.
      option 2: ZWO-FL-HLDR-M54 means you choose only one filter holder and not include filter drawer
      option 3: ZWO-FL-HLDR-M54*3 means you choose three filter holders and not include filter drawer




      0



      0
  10. Avatar

    (verified owner):

    Hello,
    how ist to attach the M68 OAG to the filter drawer?

    Kind regards
    Dieter




    0



    0
  11. Avatar

    :

    Hello,
    what do I need to use this filter drawer with 7 filters (LRGB & SHO)?

    Kind regards




    0



    0
  12. Avatar

    :

    Hello!
    Is it possible to buy one complete drawer/holder and 6 pieces of the m48*0,75 thread (filterholder)? Then I can mount the filter in this item and it´s easier and faster to change filters.
    Kind regards




    0



    0
    • Avatar

      :

      Yes, you have options before adding it to the cart.




      0



      0
  13. Avatar

    :

    Hi. Is there any chance that this Filter drawer will work with SCT and FF Dslr ? What type of adapters im gonna need?
    Best regards




    0



    0
    • Avatar

      :

      Sorry this filter drawer can’t work with SCT and FF dslr. It was specifically made to match with the ZWO ASI6200MM/MC Pro.




      0



      0

Add new

Recommended Accessories